Skip to content

2-yr labor and installation warranties. Upkeep tips

(623) 343-6774
(623) 343-6774
Technician using pliers on the control head of a blue water softener tank beside a black brine tank of salt and a water heater in a garage

ServicesWater Softener Installation

Water Softener Installation in Tolleson

We put in water softeners that are sized for your home, plumbed cleanly and set up so upkeep stays simple. Softer water means less scale in your water heater, faucets and dishwasher, so the things you already own last longer.

A softener is upkeep for everything that uses water

Hard water leaves minerals behind every time it heats or dries. That crust builds inside your water heater, coats showerheads and wears out the seals in faucets and appliances. A water softener pulls those minerals out before they reach the rest of your home.

West Valley water runs hard, so a softener here earns its keep. We install it near where the main line enters, usually in the garage, and leave a bypass so you can shut it off without shutting off your water.

The goal is a unit that runs quietly for years. That comes down to the right size, clean plumbing and a setup you can look after without calling us every month.

Technician crouches at the brass main shutoff valves in a garage beside a blue softener tank, brine tank and filter housings while a homeowner watches

What the installation covers

  1. 01

    Sizing for your household

    We ask how many people live there, how many bathrooms you have and how you use water. A unit that is too small regenerates too often and burns salt. One that is too big costs more than it needs to.

  2. 02

    Bypass valve and shutoffs

    Every softener we install gets a bypass valve. Turn it and water flows around the unit, so your faucets keep running while the softener gets worked on. We add shutoff valves where they make sense, so a future repair does not mean draining the system.

  3. 03

    Drain line with a proper air gap

    The softener flushes brine when it regenerates. We run that drain line to a safe spot with an air gap, so wastewater cannot siphon back into your supply.

  4. 04

    Control setup and walkthrough

    We set the regeneration schedule and hardness setting before we leave. Then we show you how to check the salt, read the display and put the unit in bypass.

  5. 05

    Cleanup

    We cover the floor where we work and take the old unit and all the packaging with us. Your garage is left the way we found it, minus the old equipment.

Questions about Water Softener Installation?

Call(623) 343-6774

Signs it is time for a softener

  • White crust on fixtures

    Chalky buildup around faucets, showerheads and the dishwasher door is mineral scale. If it comes back days after you clean it, the water is doing it.

  • Spotty glasses and dishes

    Hard water leaves film and spots no matter how much rinse aid you use. Soft water rinses clean.

  • Water heater popping or rumbling

    That noise is often scale settled at the bottom of the tank. It makes the heater work harder and shortens its life.

  • Your old softener quit working

    If the hard-water signs came back, the resin may be worn out or the control valve may have failed. Sometimes a repair makes sense. Sometimes replacing a tired unit is the better spend, and we will tell you which.

  • Dry skin and stiff laundry

    Soap does not lather well in hard water. People notice it in the shower and in towels that feel rough out of the dryer.

How install day goes

  1. 1

    We talk it through by phone

    You tell us about your home and what you are seeing. We go over unit sizes and what the install will involve so there are no surprises.

  2. 2

    We look at the plumbing

    We check where the main line comes in, where the drain can go and whether there is power nearby. Older homes sometimes need a loop added or a line rerouted.

  3. 3

    We plumb and set the unit

    With the main valve closed, we tie the bypass into your line and hook up the new softener. Most jobs wrap up in a single visit, and the water is only off for a portion of it.

  4. 4

    We start it up and check for leaks

    We fill the brine tank, run a regeneration and check every joint. Then we set the controls and walk you through the basics.

What sets the cost of a softener install

Every garage and every main line is a little different. We give you a number once we know how your plumbing is laid out, and we explain what is behind it before anything gets cut or connected. These are the usual drivers.

Size of the unit
A bigger household with more bathrooms needs more capacity. A unit sized right for your home also uses less salt and water over the years.
Existing plumbing
Some homes already have a softener loop built in, which keeps the job simple. If we have to add a loop or move a line, that means more hours and more parts.
Drain and power location
A drain and an outlet close to the install spot keep the work short. When either one is far away, there is more line to run.
Removing an old unit
Pulling out and hauling away an old softener takes extra time. It takes more if the piping around it needs to be redone.

Water softener installation questions

What warranty comes with the install?

Our work carries a 2-year labor warranty and a 2-year installation warranty. The resin inside the softener is covered by a 15-year warranty. The resin does the actual softening, so that is the part you want covered for the long haul.

How long does a softener last?

A well-kept softener can run for many years. The big factors are keeping salt in the brine tank, not letting the salt bridge into a hard crust and having the unit sized right so it is not regenerating more than it needs to.

How much upkeep does it need?

Mostly salt. Check the brine tank every few weeks and top it off. If you would rather not haul bags, our automated salt delivery service keeps you supplied on a schedule.

Will a softener take care of chlorine taste?

No. A softener removes hardness minerals. For taste and odor, whole-home filtration handles the whole house, and a reverse osmosis system gives you cleaner water at the kitchen sink. Some homes pair one with the softener.

Does someone have to be there while you work?

We need an adult to open up when we arrive and to stay for the short walkthrough when we finish. The hours in between are yours to use however you like. Plan on the water being shut off for part of the visit while the new lines go in.

Let's get your softener sized right

Give us a ring, tell us how many people live in your home and what the water is leaving behind, and we will walk through unit sizes and the work involved. We cover Tolleson plus Avondale, Goodyear, Litchfield Park and the towns around them.